SKIDERFlex 32K I2C EEPROM
General Description
The SKIDERFlex 32K I2C EEPROM is an I2C EEPROM with 32Kbit of storage capacity. It utilizes the SKIDERFlex mounting system with various castellated holes for easy and rapid integration in every project or product. You will not have to fiddle with tiny SMD componentens to integrate this EEPROM into your design.
Features
- 32Kbit Size
- I2C capable
- external 3.3V supply
- supports automotive temperature range (-40°C to +125°C)
- no external components needed for basic operation (except power supply and connections)
- tiny form factor (10.16mm x 10.16mm)
- compatible with breadboards (only for testing / could affect signal quality)
Operating Instructions
Configure the I2C address using the corresponding pins (A0, A1, A2) to your liking and connect the I2C lines to your device. If you are planning to integrate a I2C to USB converter into your design, check out our respective module at shop.skider.de/FLEX-CONV0.
Electrical Characteristics
DC Characteristics
| Description | Value | Unit |
|---|---|---|
| Maxmimum Current Consumption | 3 | mA |
| Minimum Input Voltage | 2.5 | V |
| Typical Input Voltage | 3.3 | V |
| Maximum Input Voltage | 5.5 | V |
Block Diagram
Pinout
| Pin | Name | Description |
|---|---|---|
| 1 | A0 | Address select 0 |
| 2 | A1 | Address select 1 |
| 3 | A2 | Address select 2 |
| 4 | WP | Write protect (can be left floating for normal operation) |
| 5 | +3.3V | +3.3V Supply pin |
| 6 | SCL | I2C Clock line |
| 7 | SDA | I2C Data line |
| 8 | GND | GND pin |
Other Specifications
| Description | Value | Unit |
|---|---|---|
| Operating Temperature | -40 to +125 | °C |
| Dimensions | 10.16 x 10.16 | mm |
| Weight | TBD | g |
Mechanical Drawing
Typical Application
The SKIDERFlex 32K I2C EEPROM is intended for use on an application specific circuit board. Premade circuit boards can be acquired at shop.skider.de/FLEX-REF1 (link to be verified). If you want to integrate the SKIDERFlex 32K I2C EEPROM into your own design, a KiCad Library can be found at support.skider.de/library (link to be verified). If you choose to integrate it into your own design, just connect the respective pins to their according lanes. No filter capacitors or termination resistors are needed.
If you need to integrate a suitable +3.3V power supply into your design check out our respective module at shop.skider.de/FLEX-P3V0-1 (link to be verified)
Environmental Compliance
The SKIDERFlex 32K I2C EEPROM is compliant with RoHS III (EU 2015/863). For more information please contact us at compliance@skider.de (e-mail to be verified)
Declaration of Conformity
Potentially compliant with 2014/30/EU. (definitely to be verified -> potentially no CE applicable / 2014/35/EU not applicable due to voltage < 75V)
Product Revisions
- FLEX-EEPR0-0:
- initial version
- FLEX-EEPR0-1:
- small visual improvements
Contact Information
If you have any further questions regarding this product, please feel free to contact us under support@skider.de. (e-mail to be verified)
© 2023 Smart Robotic Systems GmbH